18GSA5 56C1.00

GSA Series Worm Gear Reducer

Item #101447264

Auto Replenish

each One-time purchase

Product Details

Designed for quick and easy attachment of any standard NEMA "C" flange electric motor. Gear reducers may be run in either direction of rotation.

Worms for smaller size units are mounted on ball bearings
Worms for larger units and all output shafts are mounted on tapered roller bearings
All shaft and quill extensions are equipped with spring loaded lip type, synthetic element oil seals
Standard quill sizes
Torque arms may be easily rotated to other positions, mounted on the opposite side, or omitted entirely

Install guards according to applicable local and national codes for rotating shafts.

Shaft mounted units will be furnished with torque arm or mounting flange on the side shown unless otherwise specified on order

Specifications

Input HP @ RPM	1.73 hp @ 1150 rpm, 2.17 hp @ 1750 rpm
Output RPM @ Input RPM	350 rpm @ 1750 rpm
Box Height	6 3/8 in
Output (Shaft or Bore) Size	3/4 in
Frame Size	56C
Output RPM @ 1750 rpm Input	350 rpm
Washdown Duty	No
Bolt Centers w/ Std. Base Kit (in)	N/A
Ratio	5:1
Input Configuration	C-Face Quilled
Max. Thrust Load @ 1150 rpm	N/A
Reduction Type	Single Reduction
Torque Out @ 1150 rpm	430 in lb
Center Distance	1 3/4 in
Max. Overhung Load @ 1750 rpm	N/A
Output Configuration	Hollow Shaft w/ Torque Arm
Box Length	6 9/16 in
Output Torque @ RPM	359 in lb @ 1750 rpm, 430 in lb @ 1150 rpm
Frame	56C
Thermal Input Horsepower @ 1750 RPM	N/A
Worm Position	Top
Base to Shaft Center Height w/Std. Base Kit	N/A
Box Width	5 3/4 in
Input (Shaft or Bore) Size	5/8 in
HP @ RPM	2 hp @ 1800 rpm
Torque Out @ 1750 rpm	359 in lb
Base to Shaft Center Height Basic Unit	2 3/4 in
Input Base to Shaft Center Height Basic Unit	4 1/2 in
Motor Application	General Purpose
Weight	15.0 LB
EAN or UPC	662288062899