Find a Service Center
- 1 3/4" Center Distance
- 56C Frame
- 40:1 Ratio
- 5/8" C-Face Quilled Input
- 3/4" Hollow Shaft w/ Mounting Flange Shaft
description
- Designed for quick and easy attachment of any standard NEMA "C" flange electric motor. Gear reducers may be run in either direction of rotation.
features
- Worms for smaller size units are mounted on ball bearings
- Worms for larger units and all output shafts are mounted on tapered roller bearings
- All shaft and quill extensions are equipped with spring loaded lip type, synthetic element oil seals
- Standard quill sizes
- Mounting flanges cannot be changed in the field
includes
- Breather dipstick fill plug
caution
- Suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact blow or temperatures outside of the rated range
- Some chemicals can cause damage
- Polycarbonate bowls should not be exposed to chlorinated hydro-carbons, ketones, esters and certain alcohols
- Cannot be used in air systems where compressors are lubricated with fire-resistant fluids, such as phosphate ester and di-ester types
| Bolt Centers w/ Std. Base Kit (in) | N/A |
| Base to Shaft Center Height Basic Unit | 2 3/4 in |
| Output RPM @ Input RPM | 44 rpm @ 1750 rpm |
| Box Height | 7 in |
| Input Configuration | C-Face Quilled |
| Torque Out @ 1750 rpm | 489 in lb |
| Reduction Type | Single Reduction |
| Torque Out @ 1150 rpm | 567 in lb |
| Output Configuration | Hollow Shaft w/ Mounting Flange |
| Motor Application | General Purpose |
| Center Distance | 1.75 in |
| HP @ RPM | 0.3333333 hp @ 1200 rpm, 0.5 hp @ 1800 rpm |
| Max. Overhung Load @ 1750 rpm | N/A |
| Max. Thrust Load @ 1150 rpm | N/A |
| Output RPM @ 1750 rpm Input | 43.75 rpm |
| Output (Shaft or Bore) Size | 3/4 in |
| Ratio | 40:1 |
| Base to Shaft Center Height w/Std. Base Kit | N/A |
| Frame Size | 56C |
| Washdown Duty | No |
| Input HP @ RPM | 0.41 hp @ 1150 rpm, 0.5 hp @ 1750 rpm |
| Box Length | 6 9/16 in |
| Frame | 56C |
| Box Width | 6 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Input Base to Shaft Center Height Basic Unit | 4 1/2 in |
| Output Torque @ RPM | 489 in lb @ 1750 rpm, 567 in lb @ 1150 rpm |
| Worm Position | Top |
| Input (Shaft or Bore) Size | 5/8 in |
| Weight | 13.75 LB |
| EAN or UPC | 662288062561 |
