20GSF20 145T112

GSF Series Worm Gear Reducer

Item #105758820

Auto Replenish

each One-time purchase

Product Details

Designed for quick and easy attachment of any standard NEMA "C" flange electric motor. Gear reducers may be run in either direction of rotation.

Worms for smaller size units are mounted on ball bearings
Worms for larger units and all output shafts are mounted on tapered roller bearings
All shaft and quill extensions are equipped with spring loaded lip type, synthetic element oil seals
Standard quill sizes
Mounting flanges cannot be changed in the field

The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Input Configuration	C-Face Quilled
Motor Application	General Purpose
Output (Shaft or Bore) Size	1 1/8 in
Washdown Duty	No
Output Torque @ RPM	616 in lb @ 1750 rpm, 728 in lb @ 1150 rpm
Max. Overhung Load @ 1750 rpm	N/A
Frame Size	140TC
Thermal Input Horsepower @ 1750 RPM	N/A
Bolt Centers w/ Std. Base Kit (in)	N/A
Torque Out @ 1750 rpm	616 in lb
Output Configuration	Hollow Shaft w/ Mounting Flange
Box Length	8 1/16 in
Output RPM @ 1750 rpm Input	175 rpm
Box Height	6 13/16 in
Worm Position	Top
Ratio	10:1
Frame	140TC
Input Base to Shaft Center Height Basic Unit	4 3/4 in
Max. Thrust Load @ 1150 rpm	N/A
Input HP @ RPM	1.52 hp @ 1150 rpm, 1.92 hp @ 1750 rpm
Input (Shaft or Bore) Size	7/8 in
Center Distance	2 in
Output RPM @ Input RPM	175 rpm @ 1750 rpm
Torque Out @ 1150 rpm	728 in lb
HP @ RPM	1.5 hp @ 1800 rpm
Base to Shaft Center Height w/Std. Base Kit	N/A
Reduction Type	Single Reduction
Box Width	6 5/8 in
Base to Shaft Center Height Basic Unit	2 3/4 in
Weight	27.0 LB