25GSA30 56C1.25

GSA Series Worm Gear Reducer

Item #101446601

Auto Replenish

each One-time purchase

Product Details

Designed for quick and easy attachment of any standard NEMA "C" flange electric motor. Gear reducers may be run in either direction of rotation.

Worms for smaller size units are mounted on ball bearings
Worms for larger units and all output shafts are mounted on tapered roller bearings
All shaft and quill extensions are equipped with spring loaded lip type, synthetic element oil seals
Standard quill sizes
Torque arms may be easily rotated to other positions, mounted on the opposite side, or omitted entirely

Shaft mounted units will be furnished with torque arm or mounting flange on the side shown unless otherwise specified on order

Specifications

Output Torque @ RPM	1155 in lb @ 1750 rpm, 1390 in lb @ 1150 rpm
Center Distance	2 1/2 in
Output Configuration	Hollow Shaft w/ Torque Arm
Base to Shaft Center Height w/Std. Base Kit	N/A
Base to Shaft Center Height Basic Unit	3 5/16 in
Input HP @ RPM	1.13 hp @ 1150 rpm, 1.37 hp @ 1750 rpm
Motor Application	General Purpose
Washdown Duty	No
Output RPM @ 1750 rpm Input	58.33 rpm
Box Height	8 1/4 in
Output RPM @ Input RPM	58 rpm @ 1750 rpm
Torque Out @ 1150 rpm	1390 in lb
Frame Size	56C
Frame	56C
HP @ RPM	1 hp @ 1800 rpm
Input Configuration	C-Face Quilled
Max. Thrust Load @ 1150 rpm	N/A
Box Length	9 1/16 in
Worm Position	Top
Ratio	30:1
Max. Overhung Load @ 1750 rpm	N/A
Box Width	6 5/8 in
Thermal Input Horsepower @ 1750 RPM	N/A
Input (Shaft or Bore) Size	5/8 in
Torque Out @ 1750 rpm	1155 in lb
Bolt Centers w/ Std. Base Kit (in)	N/A
Input Base to Shaft Center Height Basic Unit	5 13/16 in
Reduction Type	Single Reduction
Output (Shaft or Bore) Size	1 1/4 in
Weight	29.35 LB