25GSA50 56C1.25

GSA Series Worm Gear Reducer

Item #101371492

Auto Replenish

each One-time purchase

Product Details

Designed for quick and easy attachment of any standard NEMA "C" flange electric motor. Gear reducers may be run in either direction of rotation.

Worms for smaller size units are mounted on ball bearings
Worms for larger units and all output shafts are mounted on tapered roller bearings
All shaft and quill extensions are equipped with spring loaded lip type, synthetic element oil seals
Standard quill sizes
Torque arms may be easily rotated to other positions, mounted on the opposite side, or omitted entirely

Shaft mounted units will be furnished with torque arm or mounting flange on the side shown unless otherwise specified on order

Specifications

Input Configuration	C-Face Quilled
Box Length	9 1/16 in
Reduction Type	Single Reduction
Base to Shaft Center Height Basic Unit	3 5/16 in
Input (Shaft or Bore) Size	5/8 in
Washdown Duty	No
Input HP @ RPM	0.7 hp @ 1150 rpm, 0.86 hp @ 1750 rpm
Input Base to Shaft Center Height Basic Unit	5 13/16 in
Torque Out @ 1750 rpm	1090 in lb
Ratio	50:1
Output RPM @ 1750 rpm Input	35 rpm
Motor Application	General Purpose
Frame Size	56C
Box Width	6 5/8 in
Max. Overhung Load @ 1750 rpm	N/A
Thermal Input Horsepower @ 1750 RPM	N/A
Worm Position	Top
Bolt Centers w/ Std. Base Kit (in)	N/A
Output Torque @ RPM	1090 in lb @ 1750 rpm, 1285 in lb @ 1150 rpm
Frame	56C
Output Configuration	Hollow Shaft w/ Torque Arm
HP @ RPM	0.75 hp @ 1800 rpm
Output RPM @ Input RPM	35 rpm @ 1750 rpm
Output (Shaft or Bore) Size	1 1/4 in
Center Distance	2 1/2 in
Torque Out @ 1150 rpm	1285 in lb
Max. Thrust Load @ 1150 rpm	N/A
Base to Shaft Center Height w/Std. Base Kit	N/A
Box Height	8 1/4 in
Weight	29.3 LB