25GSF20 56C1.43

GSF Series Worm Gear Reducer

Item #101480225

Auto Replenish

each One-time purchase

Product Details

Designed for quick and easy attachment of any standard NEMA "C" flange electric motor. Gear reducers may be run in either direction of rotation.

Worms for smaller size units are mounted on ball bearings
Worms for larger units and all output shafts are mounted on tapered roller bearings
All shaft and quill extensions are equipped with spring loaded lip type, synthetic element oil seals
Standard quill sizes
Mounting flanges cannot be changed in the field

The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Max. Overhung Load @ 1750 rpm	N/A
Frame	56C
Box Width	6 5/8 in
Input Configuration	C-Face Quilled
Output RPM @ 1750 rpm Input	87.5 rpm
Frame Size	56C
Base to Shaft Center Height Basic Unit	3 5/16 in
Center Distance	2 1/2 in
Output RPM @ Input RPM	88 rpm @ 1750 rpm
Box Length	9 1/16 in
Washdown Duty	No
Thermal Input Horsepower @ 1750 RPM	N/A
Box Height	8 1/4 in
Max. Thrust Load @ 1150 rpm	N/A
Motor Application	General Purpose
Ratio	20:1
Base to Shaft Center Height w/Std. Base Kit	N/A
Input HP @ RPM	1.52 hp @ 1150 rpm, 1.88 hp @ 1750 rpm
Output Configuration	Hollow Shaft w/ Mounting Flange
Torque Out @ 1750 rpm	1139 in lb
Bolt Centers w/ Std. Base Kit (in)	N/A
HP @ RPM	1.5 hp @ 1800 rpm
Output Torque @ RPM	1139 in lb @ 1750 rpm, 1364 in lb @ 1150 rpm
Input (Shaft or Bore) Size	5/8 in
Worm Position	Top
Output (Shaft or Bore) Size	15/16 in
Input Base to Shaft Center Height Basic Unit	5 13/16 in
Reduction Type	Single Reduction
Torque Out @ 1150 rpm	1364 in lb
Weight	28.0 LB