Find a Service Center
Alternate Products
- 20 mm Nominal Shaft Dia
- Fixed Dia
- Ball (Open) Linear Bearing
description
- This new, patented, self-aligning linear bearing provides twice the load carrying capacity or eight times the travel life of the industry standard. This dramatic increase in load capacity allows for the use of less expensive drive motors, linkages, gears and ball screws. The unique design allows the bearing to maintain its diametrical fit when installed in housings that are soft or slightly out of round.
applications
- Continuously supported applications where maximum rigidity and stiffness are required
features
- Can be adjusted to take out diametrical clearance
- Can be mounted in a customized housing
- Travel speeds up to 10 ft/sec
- Interchangeable with industry-standard ball bearings
- Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
- Available in both imperial and metric sizes
| Material | Delrin |
| Seals | None |
| Seal Material | N/A |
| Self Aligning | No |
| Style of Bearing | Open |
| Accuracy Class | Precision |
| Distance Between Retaining Rings | 31.2 mm |
| Shaft Dia. | 20.0000 mm |
| Type of Bearing | Ball |
| Retaining Ring Groove Width | 1.6 mm |
| Recommended Shafting Class | M |
| Corrosion Resistant | No |
| Preload | Yes |
| Slot Opening - Width | 10 mm |
| Slot Opening - Angle | 50 ° |
| Length | 45.000 mm |
| O.D. | 32.0000 mm |
| Inch/Metric | Metric |
| Dynamic Load Rating | 899.00 lbf |
| Trunion Type | N/A |
| Weight | 0.05 LB |
| EAN or UPC | 662486110422 |
