Find a Service Center
Alternate Products
- 1/2" Shaft, Carbon Spring Steel (Phosphate Coated), Radially Assembled Type, Stacked
description
- External shafts and pins
- External E ring. Perhaps the most popular and widely-used radial retaining ring is the "E." The three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.
| Type | Radially Assembled |
| Tape Width | 2 in |
| Tape Length of Stack | 8.4 in |
| Thrust Ring Safety Factor of 3 Pr Lb | 1127 lbf |
| Edge Margin | 0.104 in |
| Groove Depth | 0.052 in |
| Clearance Installed in Groove | 0.82 in |
| Limiting Speed | 14000 rpm |
| Thrust Groove Safety Factor of 2 Pg Lb | 600 lbf |
| Tape Rings Stack | 200 |
| Length of Stack | 8.4 in |
| Shaft Dia. | 0.5 in |
| Package Type | Stacked |
| Outside Dia. | 0.8 in |
| Material | Carbon Spring Steel |
| Inch/Metric | Inch |
| Series | E |
| Plating | Phosphate |
| Thickness | 0.042 in |
| RPM Limit | 14000 rpm |
| Load Capacity [Max] | 1110 lbs |
| Weight | 0.025 LB |
| EAN or UPC | 721717033449 |
