Find a Service Center
Alternate Products
- 01 Series Pillow Block
- 65 mm Shaft
- 3 5/32" Centerline to Base
- 11" Base Length
- 9 3/16" Bolt Centers
description
- All grooved outer races must be clamped axially
applications
- Conveyors
- Mechanical handling
- Electrical machinery
- Fans
- Haulage
- Winders
- Headgear
- Marine
- Paper manufacturing
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Bearing Type | Split Cylindrical |
| Housing Construction | 2 Piece |
| Series | 01 Series |
| Temperature Range [Max] | 212 °F |
| Bolt Size | 5/8 in |
| Lubrication | Relubricatable |
| Bolt Hole Spacing | 9 3/16 in |
| Static Load Rating [Max] | 24800 lbf |
| Temperature Range [Min] | 32 °F |
| Insert Type | Split Steel Insert |
| RPM [Max] | 3940 rpm |
| Dynamic Load Rating | 21800 lbf |
| Axial Load | 1200 lbf |
| Locking Device | Clamping Ring Collar |
| Base Length | 11 in |
| Housing Height | 7 in |
| Base Width | 2 3/4 in |
| Shaft Dia. | 65 mm |
| Inch/Metric | Metric |
| Bolt Holes | 2 |
| Bearing Design | Non-Expansion |
| Mounted Unit Duty | Heavy-Duty |
| Pedestal | P 03 |
| Bolt Hole Spacing Range [Max] | 9 1/2 in |
| Housing Material | Cast Iron |
| Seal Type | Triple Labyrinth Seals |
| Pillow Block Type | Thru-Bolt |
| Base Height | 1 1/4 in |
| End Type | Open End |
| Weight | 22.677 LB |
| EAN or UPC | 7316579385411 |
