Find a Service Center
- Deep Groove Bearing
- 1.38 in Inner Diameter
- 2.83 in Outer Diameter
- 0.67 in Width
- Bearing Steel Material
applications
- Used in applications with heavy radial loads or a combination of radial and thrust loads where the radial load is predominant
features
- Maximum radial load-carrying capacity
- Ability to carry heavy combined radial and thrust loads
- Designated as the notched type because it has a filling notch on one side of the inner and outer rings
- Normally furnished with ABMA CO radial clearance
- Type and material available is a two-piece, pressed steel, ball riding, stayrod cage
- Single-row maximum capacity filling-notch bearings
caution
- Polycarbonate bowls are suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact blow, or temperatures outside of the rated range. As with most plastic, some chemica
| Fillet Radius | 1 mm |
| Contact Angle | 0° |
| Outer Ring Width | 17 mm |
| Temperature Range [Max] | 450 °F |
| Static Load Rating [Max] | 5130 lbf |
| Preload Level | None |
| Locking Device | No Locking Device |
| Limiting Speed - Grease | 7800 rpm |
| Capacity | Maximum Capacity |
| Series | 62 |
| Lubricant | Oil Preservative |
| Bore Type | Round Bore |
| No. in Set | Single Bearing |
| Ball Material | Steel |
| O.D. Type | Straight w/ Snap Ring |
| Enclosure | Open |
| Precision Level | Standard (ABEC 1) |
| Radial Internal Clearance | Normal |
| I.D. | 35 mm |
| Width | 17.000 mm |
| Bearing Type | Radial |
| Inch/Metric | Metric Bore |
| Seal Type | Unsealed |
| Pre Lubricant | None |
| Inner Ring Width | 17 mm |
| Rows of Balls | Single |
| Cage Material | Steel |
| Locating | Snap Ring Fitted |
| Origin | Single Row Radial |
| Cage Type | Metal |
| Dynamic Load Rating | 6680 lbf |
| O.D. | 72 mm |
| icNumber | 7699745 |
| Seal Material | None |
| Limiting Speed - Oil | 9500 rpm |
| Snap Ring | With Snap Ring |
| Precision | Standard |
| Radial Internal Clearance Specification | Normal Clearance |
| Material | Steel |
| Weight | 0.703 LB |
| EAN or UPC | 97741003827 |
