211MG

Cylindrical Bore Deep Groove Ball Bearing

Item #102158361

Cylindrical O.D

0.83 in Outer Ring Width

Metric

+ Show More

Auto Replenish

each One-time purchase

Product Details

Used in applications with heavy radial loads or a combination of radial and thrust loads where the radial load is predominant

Maximum radial load-carrying capacity
Ability to carry heavy combined radial and thrust loads
Designated as the notched type because it has a filling notch on one side of the inner and outer rings
Normally furnished with ABMA CO radial clearance
Type and material available is a two-piece, pressed steel, ball riding, stayrod cage
Single-row maximum capacity filling-notch bearings

Any attempt to replace Super Torque with any other synchronous belt will result in drastic reduction in belt life or possible immediate failure.

Specifications

Origin	Single Row Radial
No. in Set	Single Bearing
Radial Internal Clearance	Normal
Locking Device	No Locking Device
Limiting Speed - Oil	6300 rpm
Cage Type	Metal
Inch/Metric	Metric
Capacity	Maximum Capacity
Lubricant	Oil Preservative
O.D.	3.94 in, 100 mm
Preload Level	None
O.D. Type	Cylindrical
icNumber	7699747
Snap Ring	With Snap Ring
Enclosure	Open
Dynamic Load Rating	10900 lbf
Ball Material	Steel
Cage Material	Bearing Steel
Static Load Rating [Max]	9890 lbf
Outer Ring Width	0.83 in, 21 mm
Locating	Snap Ring Fitted
Series	62
Width	0.83 in, 21 mm
Rows of Balls	Single
Bore Type	Cylindrical
I.D.	2.17 in, 55 mm
Contact Angle	0°
Fillet Radius	1.5 mm
Temperature Range [Max]	450 °F
Radial Internal Clearance Specification	Normal Clearance
Bearing Type	Deep Groove
Precision Level	Standard (ABEC 1)
Inner Ring Width	0.83 in, 21 mm
Seal Type	Unsealed
Pre Lubricant	None
Material	Bearing Steel
Precision	Standard
Seal Material	None
Limiting Speed - Grease	5200 rpm
Weight	1.559 LB
EAN or UPC	97741004756