- 70 mm ID x 125 mm OD x 24 mm Wide
- Single Shield
- No Snap Ring
- Single Row Radial Steel Bearing
applications
- Used in applications with heavy radial loads or a combination of radial and thrust loads where the radial load is predominant
features
- Maximum radial load-carrying capacity
- Ability to carry heavy combined radial and thrust loads
- Designated as the notched type because it has a filling notch on one side of the inner and outer rings
- Normally furnished with ABMA CO radial clearance
- Type and material available is a two-piece, pressed steel, ball riding, stayrod cage
- Single-row maximum capacity filling-notch bearings
caution
- Ideal for use with filters and lubricators
- Suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact blow or temperatures outside of the rated range
- Some chemicals can cause damage
- Polycarbonate bowls should not be exposed to chlorinated hydro-carbons, ketones, esters and certain alcohols
- Cannot be used in air systems where compressors are lubricated with fire-resistant fluids, such as phosphate ester and di-ester types
| Seal Type | Non-Contact Seals |
| Limiting Speed - Grease | 4100 rpm |
| Pre Lubricant | None |
| Preload Level | None |
| Outer Ring Width | 24 mm |
| Enclosure | Single Shield |
| Material | Steel |
| Rows of Balls | Single |
| Seal Material | Metal |
| Contact Angle | 0° |
| Cage Material | Steel |
| Bearing Type | Radial |
| Limiting Speed - Oil | 5000 rpm |
| Capacity | Maximum Capacity |
| Bore Type | Round Bore |
| Inner Ring Width | 24 mm |
| No. in Set | Single Bearing |
| Cage Type | Metal |
| Series | 62 |
| Locking Device | No Locking Device |
| I.D. | 70 mm |
| O.D. Type | Straight |
| Width | 24.000 mm |
| Radial Internal Clearance Specification | Normal Clearance |
| Static Load Rating [Max] | 14700 lbf |
| Dynamic Load Rating | 15600 lbf |
| Radial Internal Clearance | Normal |
| Snap Ring | No Snap Ring |
| Origin | Single Row Radial |
| Lubricant | Oil Preservative |
| Precision Level | Standard (ABEC 1) |
| icNumber | 7698847 |
| Precision | Standard |
| Inch/Metric | Metric Bore |
| Fillet Radius | 1.5 mm |
| Ball Material | Steel |
| O.D. | 125 mm |
| Weight | 2.729 LB |
| EAN or UPC | 97741005326 |

