
- 30 mm ID x 72 mm OD x 19 mm Wide
- Double Shielded
- With Snap Ring
- Single Row Radial Steel Bearing
applications
- Used with heavy radial loads, two-directional thrust loads or a combination of both
features
- Can carry significant radial loads
- Can carry substantial thrust loads in either direction, even at very high speeds
- Supplied with a pressed steel cage
- Single-row radial deep groove bearing with no filling notches
Contact Angle | 0° |
O.D. | 72 mm |
Limiting Speed - Sealed | 6300 rpm |
Lubricant | Polyurea Base |
Temperature Range [Max] | 250 °F |
icNumber | 7697156 |
Capacity | Standard Capacity |
Cage Type | Metal |
Precision Level | Standard (ABEC 1) |
Radial Internal Clearance | Normal |
Enclosure | Double Shielded |
Cage Material | Steel |
Origin | Single Row Radial |
Seal Type | Non-Contact Seals |
O.D. Type | Straight w/ Snap Ring |
Preload Level | None |
Snap Ring | With Snap Ring |
Limiting Speed - Oil | 11000 rpm |
Seal Material | Metal |
Inch/Metric | Metric Bore |
Static Load Rating [Max] | 3600 lbf |
Fillet Radius | 1 mm |
Temperature Range [Min] | -22 °F |
Locking Device | No Locking Device |
Material | Steel |
Bearing Type | Radial |
Dynamic Load Rating | 6320 lbf |
Limiting Speed - Grease | 9000 rpm |
Width | 19.000 mm |
Inner Ring Width | 19 mm |
Series | 63 |
Bore Type | Round Bore |
No. in Set | Single Bearing |
Radial Internal Clearance Specification | Normal Clearance |
Ball Material | Steel |
Locating | Snap Ring Fitted |
Rows of Balls | Single |
Outer Ring Width | 19 mm |
Precision | Standard |
I.D. | 30 mm |
Weight | 0.818 LB |
EAN or UPC | 97741007245 |
