Find a Service Center
- 60 mm ID x 130 mm OD x 31 mm Wide
- Single Shield
- With Snap Ring
- Single Row Radial Steel Bearing
applications
- Used with very heavy radial loads, or a combination of radial and thrust loads where the radial load is predominant
features
- Consists of single-row maximum capacity filling-notch bearings with bores ranging from 17 mm to 110 mm 102181677
- 1
- Maximum radial load-carrying capacity
- Type and material available is a two-piece, pressed steel, ball riding, stayrod cage
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Enclosure | Shield On One Side |
| Contact Angle | 0° |
| Bearing Type | Deep Groove |
| Outer Ring Width | 1.22 in, 31 mm |
| Bore Type | Cylindrical |
| Precision Level | Standard (ABEC 1) |
| Width | 1.22 in, 31 mm |
| Radial Internal Clearance | Normal |
| Dynamic Load Rating | 20500 lbf |
| Rows of Balls | Single |
| Locking Device | No Locking Device |
| I.D. | 2.36 in, 60 mm |
| Material | Bearing Steel |
| Inner Ring Width | 1.22 in, 31 mm |
| Temperature Range [Max] | 250 °F |
| Capacity | Maximum Capacity |
| Precision | Standard |
| Limiting Speed - Grease | 4300 rpm |
| Radial Internal Clearance Specification | Normal Clearance |
| Seal Type | Non-Contacting Seal |
| Temperature Range [Min] | -22 °F |
| Preload Level | None |
| Ball Material | Steel |
| Series | 63 |
| Locating | Snap Ring Fitted |
| Origin | Single Row Radial |
| Snap Ring | With Snap Ring |
| Seal Material | Tinplate |
| Cage Type | Metal |
| Lubricant | Oil Preservative |
| O.D. Type | Cylindrical |
| Fillet Radius | 2 mm |
| Inch/Metric | Metric |
| Cage Material | Bearing Steel |
| Limiting Speed - Oil | 5300 rpm |
| icNumber | 7704721 |
| No. in Set | Single Bearing |
| Static Load Rating [Max] | 17500 lbf |
| O.D. | 5.12 in, 130 mm |
| Weight | 4.277 LB |
| EAN or UPC | 97741008600 |
