- Deep Groove Bearing
- 2.36 in Inner Diameter
- 5.12 in Outer Diameter
- 1.22 in Width
- Bearing Steel Material
applications
- Used with very heavy radial loads, or a combination of radial and thrust loads where the radial load is predominant
features
- Consists of single-row maximum capacity filling-notch bearings with bores ranging from 17 mm to 110 mm 102181826
- 1
- Maximum radial load-carrying capacity
- Type and material available is a two-piece, pressed steel, ball riding, stayrod cage
caution
- Suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact blow or temperatures outside of the rated range
- Some chemicals can cause damage
- Polycarbonate bowls should not be exposed to chlorinated hydro-carbons, ketones, esters and certain alcohols
- Cannot be used in air systems where compressors are lubricated with fire-resistant fluids, such as phosphate ester and di-ester types
- Polycarbonate bowls, being transparent and tough, are ideal for use with filters and lubricators. They are suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact
| Lubricant | Oil Preservative |
| Bearing Type | Deep Groove |
| Limiting Speed - Oil | 5300 rpm |
| Width | 1.22 in, 31 mm |
| Seal Type | Unsealed |
| Precision Level | Standard (ABEC 1) |
| Locating | Snap Ring Fitted |
| Radial Internal Clearance Specification | Normal Clearance |
| Temperature Range [Max] | 450 °F |
| Origin | Single Row Radial |
| Preload Level | None |
| Contact Angle | 0° |
| Enclosure | Open |
| Limiting Speed - Grease | 4300 rpm |
| Series | 63 |
| No. in Set | Single Bearing |
| Cage Type | Metal |
| Inner Ring Width | 1.22 in, 31 mm |
| O.D. Type | Cylindrical |
| I.D. | 2.36 in, 60 mm |
| Rows of Balls | Single |
| O.D. | 5.12 in, 130 mm |
| Material | Bearing Steel |
| Inch/Metric | Metric |
| Fillet Radius | 2 mm |
| Capacity | Maximum Capacity |
| Precision | Standard |
| Snap Ring | With Snap Ring |
| Static Load Rating [Max] | 17500 lbf |
| Cage Material | Bearing Steel |
| Bore Type | Cylindrical |
| Radial Internal Clearance | Normal |
| icNumber | 7699753 |
| Outer Ring Width | 1.22 in, 31 mm |
| Locking Device | No Locking Device |
| Seal Material | None |
| Dynamic Load Rating | 20500 lbf |
| Pre Lubricant | None |
| Ball Material | Steel |
| Weight | 4.2 LB |
| EAN or UPC | 97741008617 |

