Find a Service Center
description
- These bearings were developed to minimize operating temperatures, noise and vibration in dynamometer applications. To achieve best results, the value of eccentricity marked on the inner ring face should be aligned 180° opposite the high point of eccentricity measured at the shaft journal.
features
- ABEC 5 inner ring tolerance
- Inner ring eccentricity value marked on inner ring face at the location of maximum lateral runout
- Special internal radial clearance
- Special E grade balls
- High speed
- Lightweight
- Inner ring land-guided phenolic separators
| Bore Type | Round Bore |
| Capacity | Maximum Capacity |
| Precision Level | Extra Precision (ABEC 7) |
| Radial Internal Clearance Specification | Special Radial Clearance |
| Bearing Type | Dynamometer |
| Contact Angle | 15° |
| Precision | Super Precision |
| Preload Level | None |
| Locking Device | No Locking Device |
| Material | Steel |
| Inch/Metric | Metric Bore |
| O.D. Type | Straight |
| Seal Type | Unsealed |
| Cage Material | Phenolic |
| Temperature Range [Max] | 225 °F |
| Rows of Balls | Single |
| Snap Ring | No Snap Ring |
| Seal Material | None |
| No. in Set | Single Bearing |
| Enclosure | Open |
| Lubricant | Oil Preservative |
| Weight | 0.0 LB |
