- Deep Groove Bearing
- 0.98 in Inner Diameter
- 3.15 in Outer Diameter
- 0.83 in Width
- Bearing Steel Material
applications
- Used with exremely heavy radial loads, or a combination of radial load is predominant
features
- Maximum radial load-carrying capacity
- Ability to carry heavy combined radial and thrust loads
- Designated as the notched type because it has a filling notch on one side of the inner and outer rings
- Normally furnished with ABMA CO radial clearance
- Type and material available is a two-piece, pressed steel, ball riding, stayrod cage
- Single-row maximum capacity fillig-notch bearings with bores ranging from 17 mm to 100 mm
caution
- Polycarbonate bowls, being transparent and tough, are ideal for use with filters and lubricators. They are suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact
| Material | Bearing Steel |
| Lubricant | Oil Preservative |
| Origin | Single Row Radial |
| icNumber | 7702560 |
| O.D. | 3.15 in, 80 mm |
| Cage Type | Metal |
| Limiting Speed - Grease | 7700 rpm |
| Enclosure | Open |
| Inch/Metric | Metric |
| Dynamic Load Rating | 8050 lbf |
| Snap Ring | No Snap Ring |
| Capacity | Maximum Capacity |
| Series | 64 |
| Precision Level | Standard (ABEC 1) |
| No. in Set | Single Bearing |
| O.D. Type | Cylindrical |
| Locking Device | No Locking Device |
| Static Load Rating [Max] | 5270 lbf |
| Cage Material | Bearing Steel |
| Preload Level | None |
| Temperature Range [Max] | 450 °F |
| Radial Internal Clearance | Normal |
| Contact Angle | 0° |
| Seal Material | None |
| Rows of Balls | Single |
| Width | 0.83 in, 21 mm |
| Precision | Standard |
| Seal Type | Unsealed |
| Bore Type | Cylindrical |
| Outer Ring Width | 0.83 in, 21 mm |
| Bearing Type | Deep Groove |
| Inner Ring Width | 0.83 in, 21 mm |
| Radial Internal Clearance Specification | Normal Clearance |
| Limiting Speed - Oil | 9400 rpm |
| Ball Material | Steel |
| I.D. | 0.98 in, 25 mm |
| Fillet Radius | 1.5 mm |
| Weight | 1.275 LB |
| EAN or UPC | 97741010061 |

