- 55 mm ID x 140 mm OD x 33 mm Wide
- Single Shield
- No Snap Ring
- Single Row Radial Steel Bearing
applications
- Used with exremely heavy radial loads, or a combination of radial load is predominant
features
- Maximum radial load-carrying capacity
- Ability to carry heavy combined radial and thrust loads
- Designated as the notched type because it has a filling notch on one side of the inner and outer rings
- Normally furnished with ABMA CO radial clearance
- Type and material available is a two-piece, pressed steel, ball riding, stayrod cage
- Single-row maximum capacity fillig-notch bearings with bores ranging from 17 mm to 100 mm
caution
- Polycarbonate bowls should not be exposed to chlorinated hydro-carbons, ketones, esters and certain alcohols
- Cannot be used in air systems where compressors are lubricated with fire-resistant fluids, such as phosphate ester and di-ester types
- Polycarbonate bowls, being transparent and tough, are ideal for use with filters and lubricators. They are suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact
| Cage Material | Bearing Steel |
| O.D. | 5.51 in, 140 mm |
| Snap Ring | No Snap Ring |
| Precision Level | Standard (ABEC 1) |
| Inch/Metric | Metric |
| I.D. | 2.17 in, 55 mm |
| Preload Level | None |
| icNumber | 7702516 |
| Fillet Radius | 2 mm |
| Origin | Single Row Radial |
| Outer Ring Width | 1.3 in, 33 mm |
| Radial Internal Clearance Specification | Normal Clearance |
| Rows of Balls | Single |
| Width | 1.3 in, 33 mm |
| Precision | Standard |
| Ball Material | Steel |
| Bore Type | Cylindrical |
| Radial Internal Clearance | Normal |
| Enclosure | Shield On One Side |
| Cage Type | Metal |
| Static Load Rating [Max] | 20200 lbf |
| Contact Angle | 0° |
| Inner Ring Width | 1.3 in, 33 mm |
| O.D. Type | Cylindrical |
| Locking Device | No Locking Device |
| Limiting Speed - Oil | 5000 rpm |
| Material | Bearing Steel |
| Seal Type | Non-Contacting Seal |
| Bearing Type | Deep Groove |
| Capacity | Maximum Capacity |
| No. in Set | Single Bearing |
| Dynamic Load Rating | 24200 lbf |
| Seal Material | Tinplate |
| Series | 64 |
| Lubricant | Oil Preservative |
| Limiting Speed - Grease | 4100 rpm |
| Weight | 5.5 LB |
| EAN or UPC | 97741010290 |

