Find a Service Center
- 40 mm ID x 80 mm OD x 1 3/16" Wide
- Single Shield
- With Snap Ring
- Maximum Capacity
- Double Row Ball Bearing
applications
- Used with heavy radial loads, two-directional thrust loads or a combination of both
- Thrust load should be carried on the nonfilling notch row
- Moderate thrust load is permissible on the filling notch row
| Locating | Snap Ring Fitted |
| Material | Bearing Steel |
| I.D. | 1.57 in, 40 mm |
| Bearing Type | Unmounted, Angular Contact |
| Cage Type | Metal |
| Ball Material | Steel |
| Precision | Standard |
| Static Load Rating [Max] | 11000 lbf |
| Limiting Speed - Oil | 7500 rpm |
| Capacity | Maximum Capacity |
| Static Load Rating | 49 kN |
| Preload Level | C3 Axial Clearance |
| Bore Type | Cylindrical |
| Series | 5200M |
| No. in Set | Single Bearing |
| Cage Material | Bearing Steel |
| Locking Device | No Locking Device |
| Snap Ring | With Snap Ring |
| Inch/Metric | Metric |
| Enclosure | Shield On One Side |
| Lubricant | Oil Preservative |
| Inner Ring Width | 1.19 in, 30.16 mm |
| Seal Material | Tinplate |
| Radial Internal Clearance Specification | Normal Clearance |
| Rows of Balls | Double |
| Seal Type | Non-Contacting Seal |
| Origin | Double Row Deep Groove |
| Outer Ring Width | 1.19 in, 30.16 mm |
| Dynamic Load Rating | 49.5 kN |
| Contact Angle | 30 Degree |
| Flush Ground | No |
| Limiting Speed - Grease | 5600 rpm |
| O.D. | 3.41 in, 86.6 mm |
| O.D. Type | Cylindrical |
| Limiting Speed - Sealed | 5600 rpm |
| Fillet Radius | 1 mm |
| Radial Internal Clearance | Normal |
| icNumber | 7704576 |
| Width | 1.19 in, 30.16 mm |
| Precision Level | Standard (ABEC 1) |
| Weight | 1.41 LB |
| EAN or UPC | 97741011839 |
