Skip to content Skip to navigation menu
Double Row Cylindrical Bore Angular Contact Ball Bearing

5217C

Double Row Cylindrical Bore Angular Contact Ball Bearing
Item #102146192
  • Unmounted, Angular Contact Bearing
  • 3.35 in Inner Diameter
  • 5.91 in Outer Diameter
  • 1.94 in Width
  • Bearing Steel Material
  • Cylindrical O.D
  • 1.94 in Outer Ring Width
  • Double Row
  • Metric
+ Show More + Show Less
Double Row Cylindrical Bore Angular Contact Ball Bearing
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • Unmounted, Angular Contact Bearing
  • 3.35 in Inner Diameter
  • 5.91 in Outer Diameter
  • 1.94 in Width
  • Bearing Steel Material

applications

  • Recommended for applications where single-row bearings are inadequate, but radial loads are not so great as to suggest a filling-notch bearing
  • Bearings will take heavy radial loads and axial loads equally in either direction

features

  • Double-row ball bearings have contact angles that converge outside the bearing, thereby increasing resistance to misalignment
  • No filling notches
  • Fully meets the requirements of American Petroleum Institute Specification 610
  • Both the inner and outer rings have closure grooves
  • One-piece, heat-treated steel for maximum retention
  • snapped into place after the full quota of balls has been introduced between the inner and outer ring
Capacity Standard Capacity
Fillet Radius 2 mm
Cage Material Bearing Steel
Outer Ring Width 1.94 in, 49.2 mm
Limiting Speed - Grease 2600 rpm
Limiting Speed - Sealed 2600 rpm
O.D. 5.91 in, 150 mm
Contact Angle 30 Degree
Static Load Rating [Max] 24700 lbf
Preload Level C3 Axial Clearance
O.D. Type Cylindrical
Material Bearing Steel
icNumber 7696301
Width 1.94 in, 49.21 mm
Rows of Balls Double
Inner Ring Width 1.94 in, 49.2 mm
Ball Material Steel
I.D. 3.35 in, 85 mm
Lubricant Oil Preservative
Flush Ground No
Seal Material None
Radial Internal Clearance Specification Normal Clearance
Bore Type Cylindrical
Snap Ring No Snap Ring
Dynamic Load Rating 124 kN
Cage Type Metal
Static Load Rating 110 kN
Precision Level Standard (ABEC 1)
Bearing Type Unmounted, Angular Contact
Seal Type Unsealed
Enclosure Open
Inch/Metric Metric
Limiting Speed - Oil 3600 rpm
Series 5200C
Precision Standard
Radial Internal Clearance Normal
No. in Set Single Bearing
Locking Device No Locking Device
Weight 6.773 LB
EAN or UPC 97741013451
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison