Skip to content Skip to navigation menu
5300-M Medium Series Bearing

5306MF1

5300-M Medium Series Bearing
Item #102146201
  • 30 mm ID x 72 mm OD x 1 5/16" Wide
  • Single Shield
  • No Snap Ring
  • Maximum Capacity
  • Double Row Ball Bearing
5300-M Medium Series Bearing
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 30 mm ID x 72 mm OD x 1 5/16" Wide
  • Single Shield
  • No Snap Ring
  • Maximum Capacity
  • Double Row Ball Bearing

applications

  • Used with heavy radial loads, two-directional thrust loads or a combination of both

features

  • Has filling notches on one side to permit assembling the maximum number of balls into the bearing
  • Contact angles converge outside the bearing
  • All inner and outer rings have closure grooves
  • Bearings may be equipped with seals, shields, snap rings or any combination
  • Has very heavy radial capacity
  • Thrust capacity in one direction with the ability to accommodate light thrust load in the reversing direction
  • One-piece, heat-treated steel for maximum retention
  • snapped into place after the full quota of balls has been introduced between the inner and outer ring
Static Load Rating [Max] 9670 lbf
Limiting Speed - Grease 6300 rpm
Precision Standard
Series 5300M
I.D. 1.18 in, 30 mm
Capacity Maximum Capacity
Inch/Metric Metric
Preload Level C3 Axial Clearance
Cage Type Metal
Flush Ground No
No. in Set Single Bearing
Snap Ring No Snap Ring
Seal Material Tinplate
Limiting Speed - Oil 8500 rpm
Locking Device No Locking Device
O.D. Type Cylindrical
Enclosure Shield On One Side
icNumber 7702336
Fillet Radius 1 mm
Radial Internal Clearance Normal
Bore Type Cylindrical
Precision Level Standard (ABEC 1)
Dynamic Load Rating 46.8 kN
Ball Material Steel
Lubricant Oil Preservative
Rows of Balls Double
Bearing Type Unmounted, Angular Contact
Seal Type Non-Contacting Seal
Limiting Speed - Sealed 6300 rpm
Material Bearing Steel
Cage Material Bearing Steel
Outer Ring Width 1.31 in, 33.34 mm
Width 1.31 in, 33.34 mm
Radial Internal Clearance Specification Normal Clearance
Static Load Rating 43 kN
Contact Angle 30 Degree
Inner Ring Width 1.31 in, 33.34 mm
O.D. 2.83 in, 72 mm
Weight 1.3 LB
EAN or UPC 97741023405
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison