
- 35 mm ID x 80 mm OD x 1 3/8" Wide
- Double Shielded
- No Snap Ring
- Maximum Capacity
- Double Row Ball Bearing
applications
- Used with heavy radial loads, two-directional thrust loads or a combination of both
features
- Has filling notches on one side to permit assembling the maximum number of balls into the bearing
- Contact angles converge outside the bearing
- All inner and outer rings have closure grooves
- Bearings may be equipped with seals, shields, snap rings or any combination
- Has very heavy radial capacity
- Thrust capacity in one direction with the ability to accommodate light thrust load in the reversing direction
- One-piece, heat-treated steel for maximum retention
- snapped into place after the full quota of balls has been introduced between the inner and outer ring
O.D. | 80 mm |
Preload Level | None |
Width | 34.925 mm |
Precision Level | Standard (ABEC 1) |
Ball Material | Steel |
Seal Type | Non-Contact Seals |
Limiting Speed - Oil | 7500 rpm |
Snap Ring | No Snap Ring |
Limiting Speed - Sealed | 5600 rpm |
Rows of Balls | Double |
Origin | Double Row Deep Groove |
Material | Steel |
Series | 5300M |
I.D. | 35 mm |
O.D. Type | Straight |
Static Load Rating [Max] | 10800 lbf |
Inner Ring Width | 1 3/8 in |
Radial Internal Clearance | Normal |
Radial Internal Clearance Specification | Normal Clearance |
Limiting Speed - Grease | 5600 rpm |
Bearing Type | Angular Contact |
Bore Type | Round Bore |
Dynamic Load Rating | 11800 lbf |
Seal Material | Metal |
Capacity | Maximum Capacity |
Outer Ring Width | 1 3/8 in |
Cage Type | Metal |
Static Load Rating | 48 kN |
Temperature Range [Min] | -22 °F |
Inch/Metric | Metric Bore |
Locking Device | No Locking Device |
Cage Material | Steel |
Temperature Range [Max] | 250 °F |
Enclosure | Double Shielded |
No. in Set | Single Bearing |
Lubricant | Chevron SRI-2 |
icNumber | 7697902 |
Contact Angle | 30° |
Precision | Standard |
Fillet Radius | 1.5 mm |
Flush Ground | No |
Weight | 1.742 LB |
EAN or UPC | 97741014427 |
