Skip to content Skip to navigation menu
5300-M Medium Series Bearing

5308MFF

5300-M Medium Series Bearing
Item #100760665
  • 40 mm ID x 90 mm OD x 1 7/16" Wide
  • Double Shielded
  • No Snap Ring
  • Maximum Capacity
  • Double Row Ball Bearing
5300-M Medium Series Bearing
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 40 mm ID x 90 mm OD x 1 7/16" Wide
  • Double Shielded
  • No Snap Ring
  • Maximum Capacity
  • Double Row Ball Bearing

applications

  • Used with heavy radial loads, two-directional thrust loads or a combination of both

features

  • Has filling notches on one side to permit assembling the maximum number of balls into the bearing
  • Contact angles converge outside the bearing
  • All inner and outer rings have closure grooves
  • Bearings may be equipped with seals, shields, snap rings or any combination
  • Has very heavy radial capacity
  • Thrust capacity in one direction with the ability to accommodate light thrust load in the reversing direction
  • One-piece, heat-treated steel for maximum retention
  • snapped into place after the full quota of balls has been introduced between the inner and outer ring
Bearing Type Angular Contact
Ball Material Steel
I.D. 40 mm
Enclosure Double Shielded
Rows of Balls Double
Flush Ground No
Limiting Speed - Grease 5000 rpm
Locking Device No Locking Device
Preload Level None
Bore Type Round Bore
Temperature Range [Min] -22 °F
Cage Material Steel
Lubricant Chevron SRI-2
Inner Ring Width 1 7/16 in
Temperature Range [Max] 250 °F
Seal Material Metal
O.D. 90 mm
Origin Double Row Deep Groove
icNumber 7697904
No. in Set Single Bearing
Inch/Metric Metric Bore
Seal Type Non-Contact Seals
Series 5300M
Limiting Speed - Oil 6700 rpm
Dynamic Load Rating 15100 lbf
Contact Angle 30°
Snap Ring No Snap Ring
Precision Standard
Capacity Maximum Capacity
Fillet Radius 1.5 mm
Radial Internal Clearance Normal
Limiting Speed - Sealed 5000 rpm
Outer Ring Width 1 7/16 in
Precision Level Standard (ABEC 1)
Material Steel
O.D. Type Straight
Radial Internal Clearance Specification Normal Clearance
Static Load Rating [Max] 14700 lbf
Static Load Rating 65.5 kN
Cage Type Metal
Width 36.513 mm
Weight 2.361 LB
EAN or UPC 97741014632
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison