Skip to content Skip to navigation menu
5300-C, 5300-SB Medium Series Bearing

5309CZZG

5300-C, 5300-SB Medium Series Bearing
Item #102142741
  • 45 mm ID x 100 mm OD x 1 9/16" Wide
  • Double Sealed
  • With Snap Ring
  • Standard Capacity
  • Double Row Ball Bearing
5300-C, 5300-SB Medium Series Bearing
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 45 mm ID x 100 mm OD x 1 9/16" Wide
  • Double Sealed
  • With Snap Ring
  • Standard Capacity
  • Double Row Ball Bearing

applications

  • Used with heavy radial loads, two-directional thrust loads or a combination of both

features

  • Double-row ball bearings have contact angles that converge outside the bearing, thereby increasing resistance to misalignment
  • No filling notches
  • Fully meets the requirements of American Petroleum Institute Specification 610
  • Both the inner and outer rings have closure grooves
  • One-piece, heat-treated steel for maximum retention
  • snapped into place after the full quota of balls has been introduced between the inner and outer ring
Snap Ring With Snap Ring
Lubricant Grease
Rows of Balls Double
Limiting Speed - Sealed 4500 rpm
Cage Type Metal
Contact Angle 30 Degree
Outer Ring Width 1.56 in, 39.7 mm
Temperature Range [Max] 250 °F
Ball Material Steel
Bore Type Cylindrical
Radial Internal Clearance C3
Locking Device No Locking Device
Limiting Speed - Grease 4500 rpm
Temperature Range [Min] -22 °F
Precision Standard
Dynamic Load Rating 72.8 kN
Static Load Rating 53 kN
Static Load Rating [Max] 11900 lbf
Bearing Type Unmounted, Angular Contact
Inner Ring Width 1.56 in, 39.7 mm
Enclosure Seal On Both Sides
Capacity Standard Capacity
Cage Material Bearing Steel
Seal Material Nitrile Rubber (NBR)
Material Bearing Steel
Fillet Radius 1.5 mm
icNumber 7701677
No. in Set Single Bearing
Seal Type Contacting Seal
Series 5300C
Radial Internal Clearance Specification Normal Clearance
Inch/Metric Metric
Preload Level C3 Axial Clearance
Limiting Speed - Oil 6000 rpm
Origin Double Row Deep Groove
O.D. Type Cylindrical
Precision Level Standard (ABEC 1)
Width 1.56 in, 39.69 mm
O.D. 4.19 in, 106.5 mm
Locating Snap Ring Fitted
I.D. 1.77 in, 45 mm
Flush Ground No
Weight 3.001 LB
EAN or UPC 97741014816
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison