Skip to content Skip to navigation menu
5300-M Medium Series Bearing

5310MFF

5300-M Medium Series Bearing
Item #100760699
  • 50 mm ID x 110 mm OD x 1 3/4" Wide
  • Double Shielded
  • No Snap Ring
  • Maximum Capacity
  • Double Row Ball Bearing
5300-M Medium Series Bearing
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 50 mm ID x 110 mm OD x 1 3/4" Wide
  • Double Shielded
  • No Snap Ring
  • Maximum Capacity
  • Double Row Ball Bearing

applications

  • Used with heavy radial loads, two-directional thrust loads or a combination of both

features

  • Has filling notches on one side to permit assembling the maximum number of balls into the bearing
  • Contact angles converge outside the bearing
  • All inner and outer rings have closure grooves
  • Bearings may be equipped with seals, shields, snap rings or any combination
  • Has very heavy radial capacity
  • Thrust capacity in one direction with the ability to accommodate light thrust load in the reversing direction
  • One-piece, heat-treated steel for maximum retention
  • snapped into place after the full quota of balls has been introduced between the inner and outer ring
Preload Level None
Bore Type Round Bore
Locking Device No Locking Device
No. in Set Single Bearing
Series 5300M
Width 44.450 mm
I.D. 50 mm
Cage Material Steel
Lubricant Chevron SRI-2
Precision Level Standard (ABEC 1)
Precision Standard
Enclosure Double Shielded
Inner Ring Width 1 3/4 in
icNumber 7696939
Radial Internal Clearance Specification Normal Clearance
Bearing Type Angular Contact
Static Load Rating [Max] 21400 lbf
Limiting Speed - Oil 5300 rpm
Capacity Maximum Capacity
Cage Type Metal
Material Steel
Outer Ring Width 1 3/4 in
Radial Internal Clearance Normal
Static Load Rating 95 kN
Temperature Range [Min] -22 °F
Snap Ring No Snap Ring
Limiting Speed - Grease 4000 rpm
Inch/Metric Metric Bore
Rows of Balls Double
Seal Type Non-Contact Seals
Flush Ground No
O.D. Type Straight
Fillet Radius 2 mm
Origin Double Row Deep Groove
O.D. 110 mm
Ball Material Steel
Limiting Speed - Sealed 4000 rpm
Seal Material Metal
Contact Angle 30°
Dynamic Load Rating 21400 lbf
Temperature Range [Max] 250 °F
Weight 4.2 LB
EAN or UPC 97741015042
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison