
- 50 mm ID x 110 mm OD x 1 3/4" Wide
- Open
- With Snap Ring
- Maximum Capacity
- Double Row Ball Bearing
applications
- Used with heavy radial loads, two-directional thrust loads or a combination of both
features
- Has filling notches on one side to permit assembling the maximum number of balls into the bearing
- Contact angles converge outside the bearing
- All inner and outer rings have closure grooves
- Bearings may be equipped with seals, shields, snap rings or any combination
- Has very heavy radial capacity
- Thrust capacity in one direction with the ability to accommodate light thrust load in the reversing direction
- One-piece, heat-treated steel for maximum retention
- snapped into place after the full quota of balls has been introduced between the inner and outer ring
Material | Steel |
O.D. | 110 mm |
Bearing Type | Angular Contact |
Bore Type | Round Bore |
Seal Material | None |
Static Load Rating [Max] | 21400 lbf |
Limiting Speed - Sealed | 4000 rpm |
Cage Material | Steel |
Precision | Standard |
Cage Type | Metal |
Seal Type | Unsealed |
Radial Internal Clearance Specification | Normal Clearance |
Radial Internal Clearance | Normal |
Origin | Double Row Deep Groove |
Dynamic Load Rating | 21400 lbf |
Limiting Speed - Grease | 4000 rpm |
O.D. Type | Straight w/ Snap Ring |
Outer Ring Width | 1 3/4 in |
Snap Ring | With Snap Ring |
Lubricant | Oil Preservative |
Limiting Speed - Oil | 5300 rpm |
Capacity | Maximum Capacity |
Width | 44.450 mm |
Locating | Snap Ring Fitted |
Static Load Rating | 95 kN |
Series | 5300M |
Inch/Metric | Metric Bore |
Inner Ring Width | 1 3/4 in |
Ball Material | Steel |
Flush Ground | No |
Contact Angle | 30° |
Fillet Radius | 2 mm |
Locking Device | No Locking Device |
I.D. | 50 mm |
Preload Level | None |
icNumber | 7696191 |
No. in Set | Single Bearing |
Enclosure | Open |
Rows of Balls | Double |
Precision Level | Standard (ABEC 1) |
Temperature Range [Max] | 450 °F |
Weight | 4.134 LB |
EAN or UPC | 97741015073 |
