Skip to content Skip to navigation menu
5300-M Medium Series Bearing

5313MF

5300-M Medium Series Bearing
Item #102137933
  • 65 mm ID x 140 mm OD x 2 5/16" Wide
  • Single Shield
  • No Snap Ring
  • Maximum Capacity
  • Double Row Ball Bearing
5300-M Medium Series Bearing
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 65 mm ID x 140 mm OD x 2 5/16" Wide
  • Single Shield
  • No Snap Ring
  • Maximum Capacity
  • Double Row Ball Bearing

applications

  • Used with heavy radial loads, two-directional thrust loads or a combination of both

features

  • Has filling notches on one side to permit assembling the maximum number of balls into the bearing
  • Contact angles converge outside the bearing
  • All inner and outer rings have closure grooves
  • Bearings may be equipped with seals, shields, snap rings or any combination
  • Has very heavy radial capacity
  • Thrust capacity in one direction with the ability to accommodate light thrust load in the reversing direction
  • One-piece, heat-treated steel for maximum retention
  • snapped into place after the full quota of balls has been introduced between the inner and outer ring
Ball Material Steel
Seal Type Non-Contacting Seal
Cage Material Bearing Steel
No. in Set Single Bearing
Flush Ground No
Precision Level Standard (ABEC 1)
Origin Double Row Deep Groove
Series 5300M
I.D. 2.56 in, 65 mm
Radial Internal Clearance Normal
Limiting Speed - Grease 3200 rpm
Cage Type Metal
Preload Level C3 Axial Clearance
O.D. Type Cylindrical
Static Load Rating [Max] 36600 lbf
Limiting Speed - Sealed 3200 rpm
Fillet Radius 2 mm
Precision Standard
Radial Internal Clearance Specification Normal Clearance
Rows of Balls Double
Contact Angle 30 Degree
Dynamic Load Rating 154 kN
Bearing Type Unmounted, Angular Contact
Capacity Maximum Capacity
O.D. 5.51 in, 140 mm
Width 2.31 in, 58.74 mm
Outer Ring Width 2.31 in, 58.7 mm
Bore Type Cylindrical
Inner Ring Width 2.31 in, 58.7 mm
Limiting Speed - Oil 4300 rpm
Material Bearing Steel
Enclosure Shield On One Side
Inch/Metric Metric
Snap Ring No Snap Ring
Lubricant Oil Preservative
icNumber 7702345
Static Load Rating 163 kN
Seal Material Tinplate
Locking Device No Locking Device
Weight 8.45 LB
EAN or UPC 97741015608
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison