Skip to content Skip to navigation menu
5300-M Medium Series Bearing

5313MFF

5300-M Medium Series Bearing
Item #100760739
  • 65 mm ID x 140 mm OD x 2 5/16" Wide
  • Double Shielded
  • No Snap Ring
  • Maximum Capacity
  • Double Row Ball Bearing
5300-M Medium Series Bearing
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 65 mm ID x 140 mm OD x 2 5/16" Wide
  • Double Shielded
  • No Snap Ring
  • Maximum Capacity
  • Double Row Ball Bearing

applications

  • Used with heavy radial loads, two-directional thrust loads or a combination of both

features

  • Has filling notches on one side to permit assembling the maximum number of balls into the bearing
  • Contact angles converge outside the bearing
  • All inner and outer rings have closure grooves
  • Bearings may be equipped with seals, shields, snap rings or any combination
  • Has very heavy radial capacity
  • Thrust capacity in one direction with the ability to accommodate light thrust load in the reversing direction
  • One-piece, heat-treated steel for maximum retention
  • snapped into place after the full quota of balls has been introduced between the inner and outer ring
O.D. Type Straight
Locking Device No Locking Device
Dynamic Load Rating 34700 lbf
Capacity Maximum Capacity
Material Steel
Limiting Speed - Oil 4300 rpm
Contact Angle 30°
Static Load Rating 163 kN
Width 58.738 mm
Outer Ring Width 2 5/16 in
Temperature Range [Min] -22 °F
Precision Standard
Snap Ring No Snap Ring
Cage Type Metal
O.D. 140 mm
Radial Internal Clearance Specification Normal Clearance
Origin Double Row Deep Groove
Bearing Type Angular Contact
Ball Material Steel
Series 5300M
Inch/Metric Metric Bore
Seal Type Non-Contact Seals
Preload Level None
Cage Material Steel
icNumber 7700266
I.D. 65 mm
Static Load Rating [Max] 36600 lbf
Inner Ring Width 2 5/16 in
Temperature Range [Max] 250 °F
Precision Level Standard (ABEC 1)
Fillet Radius 2 mm
Limiting Speed - Sealed 3200 rpm
Flush Ground No
Enclosure Double Shielded
No. in Set Single Bearing
Bore Type Round Bore
Rows of Balls Double
Seal Material Metal
Radial Internal Clearance Normal
Limiting Speed - Grease 3200 rpm
Lubricant Chevron SRI-2
Weight 8.693 LB
EAN or UPC 97741015615
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison