- Single Row Angular Contact Bearing, 50 mm ID x 90 mm OD x 20 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle
features
- MRC angular contact bearings with a PJ suffix have one heavy race shoulder on the outer ring, opposing one heavy race shoulder and on recessed race shoulder on the inner ring. Because of this construction, it is possible for this bearing to incorporate a
- 7000-PJ bearings are particularly suitable for positions where the thrust is always present in one direction. It should not be used where the bearing is subjected to radial load only, or combined radial and thrust load where the radial load is predominant
- 7000-PJ bearings are available with either peressed brass or machined brass, ball centered cages. The low shoulder diameters on the nonthrust sides of inner and outer rings, combined with large clearances between the land diameters and the cage, allow fo
- ABEC Grade 3 bore tolerances reduce the range of interference fits between the shaft and bearing bore. These tighter tolerances result in closer control of preload and minimize the risk of thermal runaway.
- 7200-PJ and PJD Series bearings are used for heavy one-directional thrust loads or combined radial and thrust loads where thrust is predominant.
| Series | 7200PJ |
| Seal Material | None |
| Flush Ground | Yes |
| Lubricant | Oil Preservative |
| Rows of Balls | Single |
| Outer Ring Width | 0.79 in, 20 mm |
| Bore Type | Cylindrical |
| Static Load Rating | 30.5 kN |
| Ball Material | Steel |
| Cage Type | Metal |
| Seal Type | Unsealed |
| Inner Ring Width | 0.79 in, 20 mm |
| Radial Internal Clearance Specification | Normal Clearance |
| Snap Ring | No Snap Ring |
| Static Load Rating [Max] | 6070 lbf |
| Precision Level | Standard (ABEC 1) |
| O.D. | 3.54 in, 90 mm |
| Internal Design | Universal Mounting |
| icNumber | 7695824 |
| No. in Set | Single Bearing |
| O.D. Type | Cylindrical |
| I.D. | 1.97 in, 50 mm |
| Limiting Speed - Oil | 8300 rpm |
| Temperature Range [Max] | 450 °F |
| Fillet Radius | 1 mm |
| Locking Device | No Locking Device |
| Enclosure | Open |
| Preload Level | Light |
| Inch/Metric | Metric |
| Cage Material | Brass |
| Dynamic Load Rating | 39 kN |
| Width | 0.79 in, 20 mm |
| Radial Internal Clearance | Normal |
| Precision | Standard |
| Capacity | Standard Capacity |
| Limiting Speed - Grease | 6400 rpm |
| Origin | Single Row Angular Contact |
| Material | Bearing Steel |
| Contact Angle | 40 Degree |
| Bearing Type | Unmounted, Angular Contact |
| Weight | 1.142 LB |
| EAN or UPC | 97741016568 |

