Find a Service Center
Alternate Products
- Single Row Angular Contact Bearing, 140 mm ID x 250 mm OD x 42 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle, Duplex (2) Set
features
- MRC 7000-P Series bearings are similar in design to 7000 Series bearings, but the 7000-P Series bearings have features that give them a greatly increased thrust capacity. They are especially recommended for those applications where maximum thrust capacity
- This heavy-duty angular contact bearing series is designed with an optimum ball complement and race groove depth and have a 40° contact angle
- 7000-P bearings are restricted to applications involving primarily thrust loads. They should not be used where the bearing will be subjected to radial load exclusively, or combined radial and thrust load where the radial load is predominant.
- Furnished in one-piece machined bronze, phenolic composition or special material riding ground OD of inner ring.
- 7200-P Light Series bearing are available in bore sizes ranging from 10 mm to 200 mm. They are used with heavy one-directional thrust loads, or combined radial and thrust loads where the thrust load is predominant.
| Bearing Type | Unmounted, Angular Contact |
| Capacity | Standard Capacity |
| Limiting Speed - Grease | 1800 rpm |
| Outer Ring Width | 1.65 in, 42 mm |
| Fillet Radius | 2.5 mm |
| Radial Internal Clearance | Normal |
| O.D. Type | Cylindrical |
| Seal Material | None |
| Inch/Metric | Metric |
| Dynamic Load Rating | 199 kN |
| Contact Angle | 40 Degree |
| Limiting Speed - Oil | 2600 rpm |
| Series | 7200P |
| Inner Ring Width | 1.65 in, 42 mm |
| Width | 1.65 in, 42 mm |
| Preload Level | Light |
| Flush Ground | Yes |
| Precision | Standard |
| Locking Device | No Locking Device |
| O.D. | 9.84 in, 250 mm |
| Internal Design | Universal Mounting |
| Static Load Rating | 216 kN |
| Cage Material | Brass |
| Precision Level | Standard (ABEC 1) |
| I.D. | 5.51 in, 140 mm |
| No. in Set | Duplex Set |
| Rows of Balls | Single |
| Radial Internal Clearance Specification | Normal Clearance |
| Seal Type | Unsealed |
| Ball Material | Steel |
| Snap Ring | No Snap Ring |
| Bore Type | Cylindrical |
| Temperature Range [Max] | 450 °F |
| icNumber | 7699066 |
| Enclosure | Open |
| Material | Bearing Steel |
| Cage Type | Metal |
| Static Load Rating [Max] | 48600 lbf |
| Lubricant | Oil Preservative |
| Origin | Single Row Angular Contact |
| Weight | 20.247 LB |
| EAN or UPC | 97741017138 |
