Find a Service Center
Alternate Products
MRC Bearing Service
8318
8000 Series PumPac® 40°/15° Angular Contact Ball Bearing Set
Item #100760780
- Single Row Angular Contact Bearing, 90 mm ID x 190 mm OD x 43 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle, Duplex (2) Set
features
- MRC 7000-P Series bearings are similar in design to 7000 Series bearings, but the 7000-P Series bearings have features that give them a greatly increased thrust capacity. They are especially recommended for those applications where maximum thrust capacity
- This heavy-duty angular contact bearing series is designed with an optimum ball complement and race groove depth and have a 40° contact angle
- 7000-P bearings are restricted to applications involving primarily thrust loads. They should not be used where the bearing will be subjected to radial load exclusively, or combined radial and thrust load where the radial load is predominant.
- Furnished in one-piece machined bronze, phenolic composition or special material riding ground OD of inner ring.
- 7300-P Medium Series bearings are available in bore sizes from 10mm o 200 mm. They can accommodate very heavy one-directional thrust loads, or combined radial and thrust loads where the thrust load is predominant.
| No. in Set | Duplex Set |
| icNumber | 7699067 |
| Fillet Radius | 2.5 mm |
| Series | 7300P |
| Rows of Balls | Single |
| Ball Material | Steel |
| Inner Ring Width | 1.69 in, 43 mm |
| Contact Angle | 40 Degree |
| Cage Material | Brass |
| I.D. | 3.54 in, 90 mm |
| Preload Level | Light |
| O.D. | 7.48 in, 190 mm |
| Lubricant | Oil Preservative |
| Width | 1.69 in, 43 mm |
| Bore Type | Cylindrical |
| Dynamic Load Rating | 159 kN |
| Precision Level | Standard (ABEC 1) |
| Snap Ring | No Snap Ring |
| O.D. Type | Cylindrical |
| Material | Bearing Steel |
| Inch/Metric | Metric |
| Locking Device | No Locking Device |
| Radial Internal Clearance | Normal |
| Precision | Standard |
| Enclosure | Open |
| Radial Internal Clearance Specification | Normal Clearance |
| Bearing Type | Unmounted, Angular Contact |
| Seal Material | None |
| Internal Design | Universal Mounting |
| Limiting Speed - Grease | 3200 rpm |
| Flush Ground | Yes |
| Outer Ring Width | 1.69 in, 43 mm |
| Static Load Rating | 137 kN |
| Seal Type | Unsealed |
| Limiting Speed - Oil | 4200 rpm |
| Static Load Rating [Max] | 33700 lbf |
| Origin | Single Row Angular Contact |
| Cage Type | Metal |
| Temperature Range [Max] | 450 °F |
| Capacity | Standard Capacity |
| Weight | 13.145 LB |
| EAN or UPC | 97741018067 |
