Find a Service Center
Alternate Products
MRC Bearing Service
8326
8000 Series PumPac® 40°/15° Angular Contact Ball Bearing Set
Item #100990923
- Single Row Angular Contact Bearing, 130 mm ID x 280 mm OD x 58 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle, Duplex (2) Set
features
- MRC 7000-P Series bearings are similar in design to 7000 Series bearings, but the 7000-P Series bearings have features that give them a greatly increased thrust capacity. They are especially recommended for those applications where maximum thrust capacity
- This heavy-duty angular contact bearing series is designed with an optimum ball complement and race groove depth and have a 40° contact angle
- 7000-P bearings are restricted to applications involving primarily thrust loads. They should not be used where the bearing will be subjected to radial load exclusively, or combined radial and thrust load where the radial load is predominant.
- Furnished in one-piece machined bronze, phenolic composition or special material riding ground OD of inner ring.
- 7300-P Medium Series bearings are available in bore sizes from 10mm o 200 mm. They can accommodate very heavy one-directional thrust loads, or combined radial and thrust loads where the thrust load is predominant.
| Bore Type | Round Bore |
| Bearing Type | Angular Contact |
| Seal Type | Unsealed |
| Ball Material | Steel |
| Seal Material | None |
| Preload Level | None |
| Contact Angle | 40° |
| Enclosure | Open |
| Limiting Speed - Grease | 2300 rpm |
| Radial Internal Clearance Specification | Normal Clearance |
| Width | 58.000 mm |
| Static Load Rating [Max] | 71900 lbf |
| Internal Design | Universal Mounting |
| Static Load Rating | 305 kN |
| Series | 7300P |
| Lubricant | Oil Preservative |
| Rows of Balls | Single |
| O.D. | 280 mm |
| Snap Ring | No Snap Ring |
| Inch/Metric | Metric Bore |
| Origin | Single Row Angular Contact |
| O.D. Type | Straight |
| Inner Ring Width | 58 mm |
| Dynamic Load Rating | 64300 lbf |
| I.D. | 130 mm |
| Precision Level | Standard (ABEC 1) |
| Material | Steel |
| Temperature Range [Max] | 450 °F |
| Fillet Radius | 3 mm |
| Flush Ground | Yes |
| Cage Type | Metal |
| Limiting Speed - Oil | 3000 rpm |
| No. in Set | Duplex Set |
| icNumber | 7699070 |
| Radial Internal Clearance | Normal |
| Locking Device | No Locking Device |
| Cage Material | Brass/Bronze |
| Precision | Standard |
| Outer Ring Width | 58 mm |
| Capacity | Standard Capacity |
| Weight | 39.854 LB |
| EAN or UPC | 97741018265 |
