Find a Service Center
- Radial Shaft Seal
- 254 mm Shaft Diameter
- 285.75 mm Housing Bore Diameter
- 15.88 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Cover/Compensation Ring/Plate Required | No |
| Shaft Dia. | 254 mm |
| Temperature Range [Max] | 225 °F |
| Seal Application | General Purpose |
| Pressure | 10 psi |
| Case Construction | Steel Case w/Inner Case |
| Lip Material | Nitrile |
| Lip Style | Internal |
| Housing Bore Dia. | 285.75 mm |
| Inch/Metric | Metric |
| Lip Type | Single Lip w/Spring |
| Temperature Range [Min] | -40 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.093 |
| Surface Speed [Nom] | 5,000 ft/min |
| Construction | HDS2 |
| Seal Design | Bonded Design |
| Spring Material | Carbon Steel Garter |
| Weight | 4.108 LB |
| EAN or UPC | 85311112710 |
