Find a Service Center
- Radial Shaft Seal
- 279.4 mm Shaft Diameter
- 330.2 mm Housing Bore Diameter
- 20.65 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Lip Type | Single Lip w/Spring |
| Temperature Range [Max] | 250 °F |
| Cover/Compensation Ring/Plate Required | No |
| Shaft Dia. | 279.4 mm |
| Seal Design | Assembled Design |
| Temperature Range [Min] | -40 °F |
| Construction | HDS2 |
| Case Construction | Steel Case w/Inner Case w/4 Adjustable Lugs |
| Seal Application | General Purpose |
| Lip Style | Internal |
| Spring Material | Carbon Steel Garter |
| Inch/Metric | Metric |
| Pressure | 10 psi |
| Lip Material | Nitrile |
| Housing Bore Dia. | 330.2 mm |
| Surface Speed [Nom] | 5,000 ft/min |
| Weight | 4.408 LB |
| EAN or UPC | 85311889759 |
