Find a Service Center
- Radial Shaft Seal
- 290 mm Shaft Diameter
- 330 mm Housing Bore Diameter
- 22.23 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Lip Type | Non-Split |
| Temperature Range [Max] | 400 °F |
| Temperature Range [Min] | -40 °F |
| Case Construction | Steel Case w/Inner Case |
| Housing Bore Dia. | 330 mm |
| Spring Material | Carbon Steel Garter |
| Seal Design | Assembled Design |
| Pressure | 15 psi |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Inch/Metric | Metric |
| Cover/Compensation Ring/Plate Required | No |
| Surface Speed [Nom] | 5,000 ft/min |
| Seal Application | Retain Lubricants and Exclude Dirt |
| Shaft Dia. | 290 mm |
| Lip Material | Fluoroelastomer - Viton |
| Construction | HDSA1 |
| Lip Style | Internal |
| Weight | 4.668 LB |
| EAN or UPC | 85311159845 |
