Find a Service Center
- Radial Shaft Seal
- 290 mm Shaft Diameter
- 333.81 mm Housing Bore Diameter
- 19.05 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Lip Type | Single Lip w/Spring |
| Pressure | 10 psi |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Spring Material | Carbon Steel Garter |
| Temperature Range [Min] | -40 °F |
| Shaft Dia. | 290 mm |
| Lip Material | Nitrile |
| Surface Speed [Nom] | 5,000 ft/min |
| Case Construction | Steel Case w/Inner Case |
| Lip Style | Internal |
| Cover/Compensation Ring/Plate Required | No |
| Housing Bore Dia. | 333.81 mm |
| Seal Application | General Purpose |
| Inch/Metric | Metric |
| Construction | HDS2 |
| Seal Design | Assembled Design |
| Temperature Range [Max] | 250 °F |
| Weight | 4.851 LB |
| EAN or UPC | 85311116893 |
