Find a Service Center
- Radial Shaft Seal
- 317.5 mm Shaft Diameter
- 368.3 mm Housing Bore Diameter
- 22.23 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Surface Speed [Nom] | 5,000 ft/min |
| Temperature Range [Min] | -40 °F |
| Inch/Metric | Metric |
| Housing Bore Dia. | 368.3 mm |
| Lip Type | Single Lip w/Spring |
| Seal Design | Molded Design |
| Lip Style | Internal |
| Temp Description | w/4 Lugs |
| Case Construction | Steel Case w/Inner Case |
| Pressure | 15 psi |
| Construction | HDS2 |
| Spring Material | Carbon Steel Garter |
| Seal Application | General Purpose |
| Temperature Range [Max] | 250 °F |
| Lip Material | Nitrile |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Cover/Compensation Ring/Plate Required | No |
| Shaft Dia. | 317.5 mm |
| Weight | 5.261 LB |
| EAN or UPC | 85311119856 |
