Find a Service Center
- Radial Shaft Seal
- 355.6 mm Shaft Diameter
- 406.4 mm Housing Bore Diameter
- 34.93 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Temperature Range [Max] | 250 °F |
| Shaft Dia. | 355.6 mm |
| Temperature Range [Min] | -40 °F |
| Housing Bore Dia. | 406.4 mm |
| Cover/Compensation Ring/Plate Required | No |
| Spring Material | Carbon Steel Garter |
| Seal Design | Bonded Design |
| Surface Speed [Nom] | 5,000 ft/min |
| Case Construction | Steel Case w/Inner Case |
| Lip Style | Internal |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Seal Application | Dirt Exclusion and Lubricant Retention |
| Lip Material | Duralip (Carboxylated Nitrile), Nitrile |
| Construction | HDSA1 |
| Pressure | 15 psi |
| Lip Type | Dual Lip w/One Spring |
| Inch/Metric | Metric |
| Weight | 6.794 LB |
| EAN or UPC | 85311123730 |
