Find a Service Center
- Radial Shaft Seal
- 431.8 mm Shaft Diameter
- 470 mm Housing Bore Diameter
- 19.05 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Lip Material | Fluoroelastomer - Viton |
| Construction | HDS2 |
| Inch/Metric | Metric |
| Cover/Compensation Ring/Plate Required | No |
| Surface Speed [Nom] | 5,000 ft/min |
| Seal Design | Molded Design |
| Pressure | 15 psi |
| Housing Bore Dia. | 470 mm |
| Shaft Dia. | 431.8 mm |
| Temperature Range [Max] | 400 °F |
| Case Construction | Steel Case w/Inner Case |
| Seal Application | General Purpose |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Lip Style | Internal |
| Spring Material | Carbon Steel Garter |
| Lip Type | Single Lip w/Spring |
| Temp Description | w/4 Adjustable Lugs |
| Temperature Range [Min] | -40 °F |
| Weight | 6.223 LB |
| EAN or UPC | 85311889278 |
