Find a Service Center
- Radial Shaft Seal
- 230 mm Shaft Diameter
- 280 mm Housing Bore Diameter
- 16 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Construction | HDS2 |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Lip Type | Non-Split |
| Temperature Range [Max] | 250 °F |
| Temperature Range [Min] | -40 °F |
| Lip Material | Nitrile |
| Cover/Compensation Ring/Plate Required | No |
| Case Construction | Steel Case w/Inner Case w/4 Lugs |
| Seal Application | General Purpose |
| Pressure | 10 psi |
| Lip Style | Internal |
| Surface Speed [Nom] | 5,000 ft/min |
| Seal Design | Assembled Design |
| Housing Bore Dia. | 280 mm |
| Shaft Dia. | 230 mm |
| Inch/Metric | Metric |
| Spring Material | Carbon Steel Garter |
| Weight | 3.825 LB |
| EAN or UPC | 85311094146 |
