Find a Service Center
- Radial Shaft Seal
- 596.9 mm Shaft Diameter
- 647.7 mm Housing Bore Diameter
- 25.4 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Temperature Range [Max] | 250 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Inch/Metric | Metric |
| Lip Style | Internal |
| Pressure | 10 psi |
| Shaft Dia. | 596.9 mm |
| Temperature Range [Min] | -40 °F |
| Seal Application | General Purpose |
| Lip Material | Nitrile |
| Spring Material | Carbon Steel Garter |
| Case Construction | Steel Case w/Inner Case |
| Construction | HDS1 |
| Seal Design | Bonded Design |
| Housing Bore Dia. | 647.7 mm |
| Lip Type | Non-Split |
| Cover/Compensation Ring/Plate Required | No |
| Weight | 11.051 LB |
| EAN or UPC | 85311138109 |
