Find a Service Center
- Radial Shaft Seal
- 240 mm Shaft Diameter
- 270 mm Housing Bore Diameter
- 16 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Temperature Range [Max] | 250 °F |
| Spring Material | Carbon Steel Garter |
| Surface Speed [Nom] | 5,000 ft/min |
| Lip Material | Nitrile |
| Temperature Range [Min] | -40 °F |
| Cover/Compensation Ring/Plate Required | No |
| Pressure | 10 psi |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Seal Design | Assembled Design |
| Case Construction | Steel Case w/Inner Case w/6 Lugs |
| Construction | HDS2 |
| Inch/Metric | Metric |
| Housing Bore Dia. | 270 mm |
| Seal Application | General Purpose |
| Shaft Dia. | 240 mm |
| Lip Style | Internal |
| Lip Type | Non-Split |
| Weight | 3.705 LB |
| EAN or UPC | 85311097727 |
