
- Radial Shaft Seal
- 635 mm Shaft Diameter
- 673.1 mm Housing Bore Diameter
- 19.05 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
Lip Type | Non-Split |
Spring Material | Carbon Steel Garter |
Lip Material | Duralip (Carboxylated Nitrile) |
Surface Speed [Nom] | 5,000 ft/min |
Lip Style | Internal |
Seal Design | Bonded Design |
Temperature Range [Min] | -40 °F |
Cover/Compensation Ring/Plate Required | No |
Construction | HDS1 |
Temperature Range [Max] | 250 °F |
Shaft Dia. | 635 mm |
Pressure | 10 psi |
Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
Seal Application | General Purpose |
Inch/Metric | Metric |
Housing Bore Dia. | 673.1 mm |
Case Construction | Steel Case w/Inner Case |
Weight | 11.531 LB |
EAN or UPC | 85311139359 |
