Find a Service Center
- Radial Shaft Seal
- 635 mm Shaft Diameter
- 685.8 mm Housing Bore Diameter
- 22.23 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Temperature Range [Max] | 250 °F |
| Cover/Compensation Ring/Plate Required | No |
| Temperature Range [Min] | -40 °F |
| Lip Style | Internal |
| Construction | HDS3 |
| Surface Speed [Nom] | 5,000 ft/min |
| Shaft Dia. | 635 mm |
| Case Construction | Steel Case w/Inner Case |
| Housing Bore Dia. | 685.8 mm |
| Pressure | 15 psi |
| Lip Type | Single Lip w/Spring |
| Spring Material | Carbon Steel Garter |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Inch/Metric | Metric |
| Seal Design | Molded Design |
| Lip Material | Duralip (Carboxylated Nitrile) |
| Temp Description | w/4 Adjustable Lugs |
| Seal Application | General Purpose |
| Weight | 11.681 LB |
| EAN or UPC | 85311139502 |
