Find a Service Center
- Radial Shaft Seal
- 280 mm Shaft Diameter
- 330 mm Housing Bore Diameter
- 24 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Temperature Range [Max] | 250 °F |
| Pressure | 10 psi |
| Lip Type | Non-Split |
| Seal Design | Assembled Design |
| Housing Bore Dia. | 330 mm |
| Spring Material | Carbon Steel Garter |
| Seal Application | General Purpose |
| Inch/Metric | Metric |
| Lip Material | Nitrile |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Cover/Compensation Ring/Plate Required | No |
| Lip Style | Internal |
| Case Construction | Steel Case w/Inner Case |
| Surface Speed [Nom] | 5,000 ft/min |
| Shaft Dia. | 280 mm |
| Temperature Range [Min] | -40 °F |
| Construction | HDS1 |
| Weight | 4.628 LB |
| EAN or UPC | 85311097536 |
