Find a Service Center
- Radial Shaft Seal
- 285 mm Shaft Diameter
- 325 mm Housing Bore Diameter
- 16 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Lip Type | Non-Split |
| Spring Material | Carbon Steel Garter |
| Surface Speed [Nom] | 5,000 ft/min |
| Pressure | 10 psi |
| Cover/Compensation Ring/Plate Required | No |
| Temperature Range [Max] | 250 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Case Construction | Steel Case w/Inner Case |
| Seal Design | Assembled Design |
| Seal Application | General Purpose |
| Housing Bore Dia. | 325 mm |
| Lip Material | Nitrile |
| Lip Style | Internal |
| Construction | HDS1 |
| Temperature Range [Min] | -40 °F |
| Shaft Dia. | 285 mm |
| Inch/Metric | Metric |
| Weight | 3.978 LB |
| EAN or UPC | 85311155564 |
