Find a Service Center
- Radial Shaft Seal
- 300 mm Shaft Diameter
- 332 mm Housing Bore Diameter
- 16 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Pressure | 10 psi |
| Seal Application | General Purpose |
| Temperature Range [Max] | 250 °F |
| Temperature Range [Min] | -40 °F |
| Inch/Metric | Metric |
| Cover/Compensation Ring/Plate Required | No |
| Surface Speed [Nom] | 5,000 ft/min |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Spring Material | Carbon Steel Garter |
| Construction | HDS2 |
| Seal Design | Assembled Design |
| Case Construction | Steel Case w/Inner Case |
| Housing Bore Dia. | 332 mm |
| Shaft Dia. | 300 mm |
| Lip Material | Nitrile |
| Lip Style | Internal |
| Lip Type | Non-Split |
| Weight | 4.891 LB |
| EAN or UPC | 85311902359 |
