Find a Service Center
- Unmounted, Angular Contact Bearing
- 0.39 in Inner Diameter
- 1.18 in Outer Diameter
- 0.56 in Width
- Bearing Steel Material
| I.D. | 10 mm |
| O.D. | 30 mm |
| Precision Level | Standard (ABEC 1) |
| Outer Ring Width | 14 mm |
| Snap Ring | No Snap Ring |
| Static Load Rating [Max] | 968 lbf |
| Limiting Speed - Grease | 16000 rpm |
| Inch/Metric | Metric Bore |
| O.D. Type | Straight |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Seal Material | None |
| Series | 322 |
| Rows of Balls | Double |
| No. in Set | Single Bearing |
| Locking Device | No Locking Device |
| Bearing Design | Converging Angle Design |
| Dynamic Load Rating | 1712 lbf |
| Enclosure | Open |
| Bearing Type | Radial |
| Capacity | Standard Capacity |
| Cage Type | Plastic |
| Inner Ring Width | 14 mm |
| Material | Steel |
| Cage Material | Plastic |
| Precision | Standard |
| Preload Level | None |
| Bore Type | Round Bore |
| Origin | Double Row Deep Groove |
| Width | 14.000 mm |
| Ball Material | Steel |
| Limiting Speed | 24000 rpm |
| Flush Ground | No |
| Radial Internal Clearance | C3 |
| Lubricant | Oil Preservative |
| Seal Type | Unsealed |
| Contact Angle | 0° |
| Weight | 0.124 LB |
| EAN or UPC | 7316570150285 |
