Find a Service Center
- Radial Shaft Seal
- 837.49 mm Shaft Diameter
- 880.95 mm Housing Bore Diameter
- 19.05 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Cover/Compensation Ring/Plate Required | No |
| Seal Application | General Purpose |
| Lip Material | Nitrile |
| Lip Style | Internal |
| Inch/Metric | Metric |
| Pressure | 10 psi |
| Lip Type | Non-Split |
| Construction | HDS1 |
| Shaft Dia. | 837.49 mm |
| Temperature Range [Max] | 250 °F |
| Housing Bore Dia. | 880.95 mm |
| Spring Material | Carbon Steel Garter |
| Temperature Range [Min] | -40 °F |
| Case Construction | Steel Case w/Inner Case |
| Surface Speed [Nom] | 5,000 ft/min |
| Seal Design | Bonded Design |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Weight | 15.945 LB |
| EAN or UPC | 85311144957 |
