Find a Service Center
- Radial Shaft Seal
- 350 mm Shaft Diameter
- 390 mm Housing Bore Diameter
- 18 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Cover/Compensation Ring/Plate Required | No |
| Construction | HDS2 |
| Temperature Range [Min] | -40 °F |
| Pressure | 15 psi |
| Seal Design | Molded Design |
| Lip Type | Non-Split |
| Surface Speed [Nom] | 5,000 ft/min |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Lip Style | Internal |
| Case Construction | Steel Case w/Inner Case |
| Temperature Range [Max] | 400 °F |
| Spring Material | Carbon Steel Garter |
| Seal Application | General Purpose |
| Lip Material | Fluoroelastomer - Viton |
| Shaft Dia. | 350 mm |
| Housing Bore Dia. | 390 mm |
| Inch/Metric | Metric |
| Weight | 5.8 LB |
| EAN or UPC | 85311174275 |
